Duplex tank bung fitting / bushing 2" x 1/2" x 1/2"

CB 1500 Clean Burn Reconditioned - 1 year parts warranty CALL 800-765-3345 for freight quote

This is a reconditioned Clean Burn CB 500 Series burner. We offer a $500 core rebate if you return a used CB 500 Series burner or $200 for others.  1 year parts warranty.

CB 5000 Clean Burn Reconditioned - 1 year parts warranty

FLUE BRUSH 2 3/4inch 70154

Pump Head, Metering Pump with internal relief valve replaces 32327 pump head and relief valve assembly 13175

This is used on the regulators for the CB 500 burner only. Later models use the Surface Mount Regulator and this will not work in those regulators. Burner model CB 500 was only made from 1994 to 1997.

Cad cell / flame sensor / photo eye 45610

CEMENT HIGH TEMP GASKET 2 OZ. Adhesive for rope gasket. 3000 Degree.

CEMENT- HIGH TEMP GASKET 10 OZ. 34162

DIAPHRAGM- REGULATOR 500 BURNER

DRAFT GAUGE 70001

70036 FLUE BRUSH HANDLE 3'

70037 FLUE BRUSH HANDLE 4' 

70144 Gauge, oil tank

GEAR MOTOR, 1400/1500 33291

Preheater / heater element 140W for Nozzle Adapter.

HIGH LIMIT TEMP SWITCH 33230

10370 O-Ring kit 10730 is for Clean Burn burners CB 500, CB 550, CB 525 or CB 525 S

10731 O-Ring kit is for Clean Burn burners CB 525-S2, CB 550-S2, CB 551-H3, CB 551-H5

POPPET VALVE

32423 Screen Filter & Gasket, Metering Pump

ROPE GASKET 93 X 3/4inch 2000/90AH/1800

SERVICE KIT CLEAN BURN / SATURN A2 OR CB 525/550S2 / CB 551 H3 / 551 H5

TEMP. SWITCH (HL) 33390 (click for details)

33418 Thermostat for the heated nozzle adapter

33557 Digital Wall Thermostat

ROPE GASKET 137 X 3/4inch-4000/90BH/2800

ROPE GASKET 144 x 3/4inch- 86BH

ROPE GASKET 90 x 3/4inch- 90AA/1400

Pump Coupling used between Pump Head 32020 / Motor 33002 J Pump.  COUPLER CONNECTS SHAFT OF MOTOR TO SHAFT OF PUMP HEAD.

REGULATOR - AIR SATURN 32285 / 32315

FILTER CARTRIDGE - LENZ

32127 FILTER CANISTER COMPLETE (Lenz)

GAUGE SQUARE 0-60- 500 BRN

SOLENOID- KIP OIL/AIR

33003 PREHEATER 150W- AIR HS- DISCONTINUED   Order 33096 300W Preheater & install it in the air passage then plug or disconnect the oil side.

33006 Preheater - 50 Watt- Oil side HS - DISCONTINUED   Order 33096 300W Preheater & install it in the air passage, leave your old heater in the oil passage as a plug.

33041 Proving Switch

O-RING- PLUNGER / NUCLEUS

CONNECTOR PLUG FEMALE - 3500/5000 - 33150

33168 Amber Light - Pump Indicator used on Clean Burn burners

NUCLEUS W/ SPRING / PLUNGER 33229

O-RING INNER- S.M. SOLENOID

O-RING S.M. SOLENOID BODY

CONNECTOR PLUG 33336 FEMALE YELLOW CORD / PIGTAIL - LONGER PLUG FOR CB 1500 / CB 1750 / CB 2500 / CB3250 (HORIZONTAL FURNACE MODELS) MATES WITH CB 33149 MALE PLUG ON BURNER.

Air Tube, 1/4inch  This tube goes from the connector block on the Clean Burn furnace up to the burner.

Blower Wheel - HS burner motor 31003 / Squirrel Cage Fan

CB 1800 Clean Burn Reconditioned - 1 year parts warranty

CB 2800 Clean Burn Reconditioned - 1 year parts warranty CALL 800-765-3345 for freight quote

CHECK VALVE 1/2inch 32089

CHECK VALVE 3/4inch 32021

CONNECTOR PLUG (FEMALE) 14/18/2800 - 12198

CONNECTOR MALE 3/16inch T X 1/8NPT - 32043

DAMPER- BAROMETRIC Adaptable 9" to 10" (Tee not included)

DIAPHRAGM - OIL- HS Regulator

DOOR GASKET CB 2500

ELBOW BRASS- 90 ST. MTG PUMP

Energy Retention Disk / Target 15/1750/25/35/5000

31113 FAN SQUIRREL CAGE/ BLOWER WHEEL

GAUGE OIL (HS) 

GAUGE- AIR PRESSURE HS

Inspection door flap with spring loaded hinge for observation ports Part # 11325.  It will fit all Clean Burn furnace models.

METERING PUMP ASSY 3500

METERING PUMP ASSY 5000

METERING PUMP FOR BOILER CB 350 CTB

CLEAN BURN / DELAVAN NOZZLE 9-11 PART NUMBER 32002

NOZZLE 9-3, Delavan siphon air atomizing nozzle 30609-3 - MAX QTY 2

NOZZLE 9-4 32004 / CLEAN BURN / DELAVAN 30609-4

NOZZLE 9-7 32005 WASTE OIL FURNACE NOZZLE BY DELAVAN 30609-7 - QTY MAX 2

NOZZLE 9-8 32001 / CLEAN BURN / DELAVAN 30609-8

32156 O-RING- LENZ FILTER SCREEN

O-RING- LENZ - LARGE

O-RING- NOZZLE ADAPTER

Primary Control used on all Clean Burn hot air furnaces.  Can also be used for hot water boilers.

PUMP COVER GASKET

PUMP HEAD - J STYLE for Clean Burn waste-oil furnaces that do not have a metering pump.

REGULATOR KIT CB 500 Series Burners

REG. KIT- HS OIL

RETENTION HEAD- FLAT

SEAT (32012 REGULATOR) HS

TERMINAL BLOCK 12001

11385 OBSOLETE TARGET DISC S.S.

CONNECTOR PLUG MALE - YELLOW CORD HS 33102

ELECTRODE UL- RH 2000/4000

Clean Burn Electrode UL- LH Left Hand for CB 2000/4000 part # 33109

Cad Cell also known as the photo eye or flame sensor.  This is used on all the Clean Burn model furnaces.

OBSOLETE USE 33400 PRIMARY CONTROL

Buss Bars 4 1/4 inch long brass connector

33169 Green Light, power indicator

MOTOR 1/10 HP 500 Series Burner Motor

CONTRACTOR 240 V 2 POLE 33182

TRANSFORMER ELECTRIC IGNITOR, CARLIN (CB 500 BURNER) 33189

C-Clip 33198 used on solenoid 33013.

70416 OBSOLETE SEE 31232 TARGET- SS 15/25/35/5000

Heater Block Thermostat 33011

SPARK ARRESTOR CAP 10inch

STORM COLLAR- 10inch SS

CONTRACTOR 120 V Single Pole 33207

STOVEPIPE SS 8 X 12inch

STORM COLLAR- 8inch STAINLESS STEEL

TERMINAL BLOCK (13) CB 500 33247

70137 ADAPTER 10inch SINGLE WALL PIPE, CONNECTS SINGLE WALL GALVANIZED PIPE TO TRIPLE WALL CLASS A PIPE.

SERVICE KIT 70370 / 70139 CLEAN BURN CB 500, 550, 525 & 525-S